板材模頭系列
采用雙流道設計，上下模唇可調并帶有模唇油溫控制，所生產制品表面結皮效果好，內應力小，真正實現表面結皮 發泡。制品厚度5-30mm。
服務熱線：15806226098
詳情
JW-B-C1
標準衣架式流道設計，. 上模唇采用推拉式或推出式微調，下模唇可換，調節范圍最大達5mm,適用生產PC、PMMA、GPPS、PET.等單層或多層高透明片材或板材。,
Standard coat-hanger design, the upper die lip adjusting adopts the push- pull type or push- out fine- tuning type,thelower die lip can exchange, the maximum adjusting range up to 5 mm, it is suitable for the production of PC, PMMA,GPPS, PET, single-layer or multi-layer high transparent sheet or plate
JW-B- A2
重型模頭采用標準衣架式流道設計，上模唇可調、下模唇可換及45度調節阻流棒調節裝置,能夠滿足不同厚度制品的需求。適用生產寬度在2000mm以下,厚度3-30mm的ABS、PE、PP厚板。
With special coat-hanger channel design, adjustable upper die lip, changeable lower die lip and 45° blocking bar, thedie adapt to ABS, PE, PP thick plate with the width below 2000mm and thickness between 3- -30mm.
詢價
推薦新聞
